• Handles a super-wide range of components from 0402 chips to 55mm components and with long connectors.

  • Handles components with heights up to 25.5mm.

  • Simplified Pressing force control from 10 to 30N.

  • +/-30 ~μm QFP mounting absolute accuracy and

  • +/-20 ~μm QFP Repeatability in full time operation.

  • 8,400CPH (0.43 sec/CHIP Equivalent: optimum

  • condition) mounting capacity.

  • Applicable to large size PCB (L510mm x W460mm).

  • Built-in tape cutter available as an option.

  • Conformity with both Machinery directive and

  • EMC directive (CE marking).

YS100 specifications (Model: KJJ-000)


YS100
Applicable PCB  L510 x W460mm to L50 x W50mm <Note 1> <Note 2> 
Through-put (Optimum)  25,00CPH (0.14sec/CHIP Equivalent) 
Mounting accuracy
(Yamahas' standard components)		  Absolute accuracy (,(.1+3) : +/-0.05mm/CHIP, +/-0.03mm/OFP
Repeatability (3) :+/-0.03mm/CHIP, +/-0.02mm/OFP 
Applicable components  0402(Metric base)to 45mm components,SOP/SOJ,QFP, connector,PLCC,CSP/BGA, long connector(W45mm or less)<Note3><Note4>
Odd-shaped components (such as special connectors) which requires pressing force control mounting (10 to 30N)
Height of components which can be mounted: 25.5mm or less <Note 5>
Allowable height on PCB surface before transport: 6.5mm or less 
Number of component types  96 types (Max, 8mm tape reel conversion) <Note 1> 
Power supply  3-Phase AC 200/208/220/240/380/400/416V ±10% 50/60Hz 
Air supply source  0.45MPa or more, in clean, dry states 
External dimension
<Note 6> 		 L1,665 x W1,562 (End of cover) x H1,445mm (cover top)
L1,665 x W1,615 (End of guide for feeder carriage) x H1,445mm (cover top) 
Weight  Approx. 1,630kg (Main unit only) 

<Note 1> It is varied by the combination layout together with sATS I dYTF etc.

<Note 2> For information on "2 stages push-up spec.", please consult us separately.

<Note 3> In case of FNC head type, the applicable components range is 031 mm or less Components.

<Note 4> When handling long connectors and large sized components, about the eccentric offset values and the rotation angle, please consult us separately. <Note 5> 4mm or less height of upper face of PCB before transport is required for the FNC head type.

<Note 6> This dimension does not include the projection.